What is a static seal?

A static seal usually refers to a seal between two stationary surfaces. The so-called static seal refers to a seal that is in a static state without relative motion during the operation of the bearing. A seal without relative motion between the sealing couplings is called a static seal. A seal without relative motion between the two couplings at the sealed part of the static seal is called a static seal.

1. The so-called static seal refers to the seal that is in a static state without relative motion during the operation of the bearing. The static seal basically uses an "O" type rubber seal in the oil film bearing. The specifications of different installation parts are also different, and the static seal is in the oil film bearing. The use of the above is generally distributed in: 1) The contact between the return ring and the bearing seat

2. The seal without relative motion between the seal couplings is called static seal. The seal with relative motion between the seal couplings is called dynamic seal. If the module does not have the characteristics of generalization and serialization, it is difficult to realize the system combination

3. The Seals on construction machinery are divided into two categories: static seals and dynamic seals: the seals between the fixed surfaces are called static seals, such as construction machinery engine cylinder gaskets and various pipeline interface gaskets

4. Sealing device and anti-leakage measures on beverage production line 2.1 Static seal of beverage production line The sealing of the static part of the beverage production line is called static seal. A large number of static seals are used on the beverage production line, but different sealing forms are used in different occasions.

5. The seal between the relatively static joint surfaces is often called static seal. The doors, windows and orifices of the carriage are closed by closing the doors, windows, and orifice covers to make the sealing surfaces close to each other, contact or even embed them with the help of sealing strips. Eliminate gaps which are contact seals

6. Static seal means that the sealing part has no relative movement and is used to seal between fixed parts. Dynamic seal is used to seal between parts with relative movement. According to the characteristics of relative movement, dynamic seals are divided into reciprocating seals and rotary seals. seal

7. The seal between the relatively static mating surfaces is called a static seal. The seal between the relatively moving mating surfaces is called a dynamic seal. Static seals can be divided into: plane seals (axial seals) and cylindrical seals (radial seals), Leakage clearance is axial clearance and radial clearance respectively

8. The seal between two relatively static parts is called static seal, and the seal between two relatively moving parts is called dynamic seal. As long as the static seal selects the appropriate gasket material and type, and determines the pre-tightening force of the bolt, the ideal seal can be achieved Effect

9. The seal that does not have relative motion between the two coupling parts of the sealed part of the static seal is called static seal. The static seal can achieve leak-free sealing. The static seal uses O-rings, in addition to various gaskets, seals Although the static sealing of various gaskets is convenient and reliable, different degrees of leakage will sometimes occur when improperly used, such as plane static sealing with combined sealing washers and screw plugs.