Common sense of general use of sealing rings

The following points need to be paid attention to when using the sealing ring:

1. Purchasing sealing rings: choose reputable brands or long-term cooperative suppliers and supply channels to ensure that the product quality can be well checked and maintain a stable quality level.

2. Storage: The storage temperature of the sealing ring is preferably below 30 degrees Celsius to avoid high temperature aging of the sealing ring. The sealing ring must be stored in a sealed package to avoid contact with moisture or dust in the air. The sealing ring must avoid strong light exposure to avoid the Seals being eroded by ozone in the air or prematurely aging. Therefore, it is recommended that users must check whether the sealing ring is properly stored and whether it has exceeded the shelf life when choosing a supplier or purchasing from a sealing ring store. Otherwise, no matter how high-quality sealing rings can be provided by the sealing ring manufacturer, it may only be the discarded sealing rings that are delivered to the user.

3. Design: While using high-quality sealing rings, many users choose unsuitable products in other aspects such as guidance and dust prevention in order to reduce costs. This results in problems such as leaks or leaks.

4. Installation: When installing the sealing ring, the most important thing is to avoid damage to the sealing ring. The right finish, safe chamfering, deburring, and the right tools. In the process of installation, dust should also be avoided on the surface of the sealing ring, and how to properly place the sealing ring after it is installed to avoid damage to the sealing ring and clean hydraulic medium.

5. Use: In many cases, after the supporting user completes the process, even if the equipment has passed the test, there will still be problems after it is delivered to the user for a period of time. In general, it may be due to improper selection of the sealing ring, or it may be caused by improper use. For example, the oil temperature is too high, causing the sealing ring to burn out. It can check whether the cooling system is operating normally, whether the surface of the piston rod is worn and leaking, whether there is debris in the hydraulic oil, whether the filter is invalid, etc.